• Content count

  • Joined

  • Last visited

Everything posted by Pri

  1. Hi, I am trying to implement a chart using 3DMsCombi.swf. Everything in that charts gets dispalyed properly except that the Labels are getting overlapped: because of the lables are very long. because the size of the chart is small. PFA the screen shot: 3 D chart.bmp Is there a way i can display the lables properly without increasing the chart size? I have tried the following possiblities and it did not help: Increaasing the size of the chart - This works, but my screen looks bad as the size of the chart becomes too big. Also, if the data gets increased I will have to resize the chart again. Changing the angle of the chart. Increasing the plot percentage. Decreasing the font size of the lables. If there is no exact solution you can help me with some work arround also. Thank you, Priyanka
  2. Hi, I am using FusionCharts XT (v3.2.2) Service Release 4 (Released on 6th August, 2012). PFB the xml code i have used: <chart bgColor='FFFFFF' allowScaling='0' allowRotation='0' palette='1' clustered='0' showPlotBorder='0' zGapPlot='40' zDepth='30' divLineEffect='emboss' startAngX='5' endAngX='5' startAngY='-50' endAngY='-50' canvasBgAlpha='0' canvasBorderAlpha='0' outCnvBaseFontSize='13' baseFontSize='11' formatNumberScale='0' showYAxisValues='1' formatNumber='0' plotFillRatio='100' legendBgAlpha='0' legendBorderAlpha ='0' LegendShadow='0' chartLeftMargin='0' chartTopMargin='0' chartBottomMargin='0' chartRightMargin='0' captionPadding='0' yAxisNamePadding='0' xAxisNamePadding='0' animation='0' xLabelGap='50'> <categories fontSize='9'> <category label='AAAAAAAAAAAAAAAA'/><category label='AAAAAAAAAAAAAAAA'/><category label='AAAAAAAAAAAAAAAA'/> <category label='AAAAAAAAAAAAAAAA'/><category label='AAAAAAAAAAAAAAAA'/><category label='AAAAAAAAAAAAAAAA'/> <category label='AAAAAAAAAAAAAAAAD'/><category label='AAAAAAAAAAAAAAAA'/><category label='AAAAAAAAAAAAAAAA'/> <category label='SAAAAAAAAAAAAAAAA'/><category label='AAAAAAAAAAAAAAAA'/><category label='AAAAAAAAAAAAAAAA'/> <category label='AAAAAAAAAAAAAAAA'/><category label='AAAAAAAAAAAAAAAA'/><category label='AAAAAAAAAAAAAAAA'/> <category label='AAAAAAAAAAAAAAAA'/><category label='AAAAAAAAAAAAAAAA'/><category label='AAAAAAAAAAAAAAAA'/> <category label='AAAAAAAAAAAAAAAA'/><category label='AAAAAAAAAAAAAAAA'/><category label='AAAAAAAAAAAAAAAA'/> </categories> <dataset seriesname='In Transits' color='4E81BD'> <set value='0'/><set value='0'/><set value='18'/><set value='8'/><set value='1'/><set value='9'/><set value='5'/><set value='9'/><set value='1'/> <set value='16'/><set value='1'/><set value='10'/><set value='1'/><set value='2'/><set value='5'/><set value='8'/><set value='15'/><set value='0'/> <set value='0'/><set value='4'/><set value='1'/> </dataset> <dataset seriesname='Received But Not Shipped' color='C1504C'> <set value='1'/><set value='2'/><set value='12'/><set value='6'/><set value='0'/><set value='4'/><set value='1'/><set value='0'/><set value='0'/> <set value='4'/><set value='0'/><set value='9'/><set value='0'/><set value='0'/><set value='0'/><set value='1'/><set value='2'/><set value='0'/> <set value='2'/><set value='9'/><set value='1'/> </dataset> <dataset seriesname='Received And Shipped' color='9BBB5A'> <set value='7'/><set value='0'/><set value='7'/><set value='2'/><set value='4'/><set value='4'/><set value='3'/><set value='3'/><set value='0'/> <set value='12'/><set value='0'/><set value='2'/><set value='5'/><set value='0'/><set value='4'/><set value='9'/><set value='7'/><set value='4'/> <set value='0'/><set value='0'/><set value='1'/> </dataset> <styles> <definition> <style name='dataFont' type='font' color='000000' bold='1'/> </definition> <application> <apply toObject='DATAVALUES' styles='dataFont'/> <apply toObject='DATALABELS' styles='dataFont'/> <apply toObject='LEGEND' styles='dataFont'/> <apply toObject='CAPTION' styles='dataFont'/> </application> </styles></chart>
  3. Hi, Here goes my problem. I am trying to click on a data set in my chart which opens up another chart in a pop up. First time the chart is displayed properly. The second time when I re-click on same dataset. I get a javascript error. Attached is the screen shot of the error. fusion charts error.bmp Kindly help me in recognizing the problem and if possible let me know the solution / workarround for the same. I need it urgently as I have a deliverable for day after tomorrow. Thanks a lot in advance. Priyanka
  4. Problem With Pop Up Chart

    Hi Sanjukta, Thanks for the reply, I am working on the latest version of FusionCharts only, but still I am facing the problem. Thanks, Priyanka
  5. Hi Friends, I have a requirement where I have to draw expenential trend line in my chart. Is there a way by which I can achieve the requirement? Thank you, Priyanka
  6. Hi, For drill down of charts, on click of a data plot another charts appears in a popup window. This is working fine for me normally. But when I am exporting an excel file from my application. After exporting this excel as soon as I go back to drill down of the chart, I get "unspecified fusion charts" error. To resolve this I went through the fusion charts documentation and go to know that I can solve this problem using link='j-{javascript method}-{parameters}'. But when I tried that nothing is happening on click of the chart. PS. I tried displaying the example chart by Fusion charts for drill down using javascript. But I got no data to display message. Please let me know if I would have gone wrong somewhere. Also please help me resolving the "Unspecified fusion charts" error. Thanks, Pri.
  7. Problem With Mapping

    Hi All, I am trying to create a line chart where i have 8 values only 1 of the 8 values is 1 rest are 0. When I try to plot this i get the following chart: fusion charts prb.bmp The problem is the values displayed on Y- Axis. When I put numDivLines='0' I get the following chart where the mapping is not correct, as it marks a value which is less than 1. fusion charts prb.bmp Can you please help me with this? Thank you, Pri
  8. Problem With Mapping

    Thanks a lot Sumedh.
  9. Problem With Mapping

    Hi, I am sorry for attaching different xml. But the difference was about just 1 number in dataset. Rest the XML was same. Also thanks a lot for your suggestion this did solve my problem, but is there any way that I can avoid decimal numbers appearing on y-axis? Thank you, Pri.
  10. Problem With Mapping

    Hi Sumedh, PFA the xml below: FG Forecast.xml Thanks, Priyanka
  11. Problem With Mapping

    Hey Friends, Any updates???
  12. Hi, I need to know the location Ids of, say certain cities, which i can map it on the world map. Do you have a list of the x and y cordinates of the locations so that I can easily mark the locations. Request you to please help me with this as it will really help me to finish off my work in short span of time that i have. Thank you,
  13. Hi, I am trying to display 3 years data in a chart. I have lables that mark weekly data for the chart. Now to increase the redablity, I want to mark data for 1 year with year also. For better understanding of what I want please refer to the image attached. eg1.bmp Let me know if you have any concerns. Thank you.
  14. Thanks a lot Sudipto. It did help me a bit.
  15. Thanks a lot for the quick reply Sumedh.
  16. Hi, I have three charts in my web page and I am trying to save them with batch export in PNG format. As of now all the charts are displayed one below the other in the PNG file. Is there a way to control the location of the charts display in PNG file? I want 2 charts to be displayed side by side and the last chart at the bottom of the other two charts. Thank you, Pri
  17. Query Regarding Batch Export

    Thanks a lot for the information Sumedh .
  18. Hi Friends, PFA a chart. In this chart except for the first bar all the values are displayed inside the bars. Can I control the position of these values so that all the values are displayed either inside or outside the bars. I tried using placeValuesInside='1' parameter, but nothing happened. Also is there a way that I can display all the values at the base of the bars? query.bmp Thanks, Pri
  19. Problem With Drill Down Of Charts

    Hi, I looked into this again and found that I was pointing to a wrong folder. When I included the correct folder in my trusted location the code is working for me know. Thanks a lot team for your continuous support.
  20. Problem With Drill Down Of Charts

    Hi, Thanks. I changed the settings for the flash player and now it is working for file system. But it is not working when I am generating the chart thorugh java code. .
  21. Problem With Drill Down Of Charts

    Hi, I am passing 1 parameter with this in this way, Javascript:get(""+region+""). I tried calling the method as "j-get-region", but on click i am just getting hand symbol and nothing is happening. Thanks, Priyanka
  22. Problem With Drill Down Of Charts

    Hi Sudipto, Thanks a lot. I am using ver 3.1 for fusion charts, and I came to know about j-format from the documentation that I got along with this version, so I gussed it should work with my version. I tried the example from your documentation and for me nothing is happening onclick. Although when I go to the data plot my pointer changes to hand recognising that there is a link. Do you think I would have missed out something? Regards, Priyanka
  23. Problem With Drill Down Of Charts

    Hi Sumedh, There is one different module in my application where I am exporting an excel. After I export this excel, I go back to the drill down chart and click on the data plot. As soon as I click on the data plot I get "unsepcified error". Currently on click of data plot I am using follwoing "Javascript:get()" to call the chart. I am using version 3.1 of fusion charts. Below is the screen shot of my error. error.bmp Thanks, Priyanka
  24. Hi Friends, Attached is a chart that I am using. I want the clickable option on this chart ie. when I click on a bar another chart should open. I was able to achieve that, but as you can see the for the last bar the value is too small, as a result I am not able to click on the bar. Is it possible that I can revoke this another chart when I click on the value of that bar instead on clicking on the bar? If not, can you please give me an alternate suggestion? query.bmp Thanks in advance, Pri
  25. Thanks a lot Sumedh. It did help me .