Y Div Lines Relative To Zero Plane

[deepti]

Hi,

 

Is there any way to show the chart horizontal div lines relative to the zero plane when the chart has negative values too.In my chart I have given the number of decimal points as 4. But sometimes when the label on the y axis values have some values like 0.0000xx it will be shown as 0 only.Ultimately there will be two zeroes.I don't want this to happen.I know that there is an option to set the visibility of zero plane.But I don't want to make the zero plane invisible also.Also since the div lines are not drawn relative to the zero plane where ever the zero plane comes there will be two lines drawn close.One the div line and one the zero plane.If there is any way where I can specify that the div lines should be drawn relative to the zero plane I think this can be solved.But is there any way for that.

 

thanks in advance,

Dipti.

[Guest Angshu]

Hi,

 

Could you please send us a screenshot of your requirement?

 

Awaiting for your response.

[deepti]

Hi,

 

Could you please send us a screenshot of your requirement?

 

Awaiting for your response.

 

Hi,

Thanks for the response .

Please see the chart I have attached.In this you can see two div lines, one marked 0 that is the zero plane, and the other marked 0.0001. Sometimes depending on the scaling if this value is 0.00001 then it will also be shown as 0 only.Another thing is two lines are being shown close together rt? But if the div lines are drawn relative to the zero plane with the interval i don't think so this will happen.Is there any way in which I can tell fusion chart to draw the div lines relative to the zero plane so that the lines will be shown from zero plane at specific interval.

 

Thanks,

Dipti.

[Sanjukta]

Hi,

 

I am afraid, this is not possible, as of now.

 

Currently FusionCharts decides the positions of the number of div lines mentioned (or calculates automatically) depending on the upper and the lower limits of the chart.

 

Hope this helps.

[deepti]

Hi,

 

I am afraid, this is not possible, as of now.

 

Currently FusionCharts decides the positions of the number of div lines mentioned (or calculates automatically) depending on the upper and the lower limits of the chart.

 

Hope this helps.

 

Ok fine,Thanks.Hope you will consider this in your future versions.

 

Dipti.

[Sanjukta]

Hey Dipti,

 

We have made a note of your suggestion for our future purpose.

 

Thank you for your continued patience and patronage.

 

Happy FusionCharting!