simonmcm Report post Posted March 21, 2011 Hi, I am trying to install Fusion Charts for SharePoint on our development environment, We are running SharePoint 2010 on Windows 7 Professional. The installation seems to run correctly, but when I add a fusion chart web part to a page i get the following error: WebPart can't be loaded. Please contact your site administrator. It lets me run the charts wizard but when i try to connect the chart to anything I get the following error: Could not save chart settings Also if i try to access fusion charts through site settings i get the same error: WebPart can't be loaded. Please contact your site administrator. Anybody have any ideas what might be causing these errors any help would be greatly appreciated. Thanks, Share this post Link to post Share on other sites
Rahul Kumar Report post Posted March 29, 2011 Hi Simon, Sorry for the late reply. Could you please re-download the updated version from http://www.fusioncharts.com/sharepoint and install it again, also please make sure to to follow the complete uninstallation process given in the "readme.html" file in the package. Share this post Link to post Share on other sites
Rahul Kumar Report post Posted May 4, 2011 Hi Simon, Hope you are keeping well. Just touching base to find out if you were able to use FusionCharts for SharePoint? Share this post Link to post Share on other sites
Andrius J Report post Posted June 2, 2011 Hi, I'm having the same problem on my environment (WSS 3.0 on Windows Server 2008). Downloaded Fusion Charts for SharePoint today (Jun 2, 2011), deployed successfully and keep getting errors after adding webparts and starting wizard: * Could get not data for chart And sometimes I can see provider list, but then I end with: * Could not save chart settings Hi Simon, Hope you are keeping well. Just touching base to find out if you were able to use FusionCharts for SharePoint? Share this post Link to post Share on other sites
Rahul Kumar Report post Posted June 2, 2011 Hi Andrius, Could you please try adding the Web Part to your root site and let us know the result? Share this post Link to post Share on other sites
pavers1970 Report post Posted June 29, 2011 (edited) I receive the "WebPart can't be loaded" message also. However, my detailed message is a little different. See below. NOTE: It installed fine on our development environment, but when I go to install in production I get this message below. Note, also, that our environment has load balanced front ends. I installed on both WFE. WebPart can't be loaded. Please contact your site administrator. More... There is no 'Chart Configuration' list at FusionCharts.SharePoint.Charts.DAL.ListHelper.Get[T](SPWeb web, String listTitle, SPQuery query, Func`2 converter) Edited June 29, 2011 by pavers1970 Share this post Link to post Share on other sites
pavers1970 Report post Posted June 29, 2011 (edited) I receive the "WebPart can't be loaded" message also. However, my detailed message is a little different. See below. NOTE: It installed fine on our development environment, but when I go to install in production I get this message below. Note, also, that our environment has load balanced front ends. I installed on both WFE. WebPart can't be loaded. Please contact your site administrator. More... There is no 'Chart Configuration' list at FusionCharts.SharePoint.Charts.DAL.ListHelper.Get[T](SPWeb web, String listTitle, SPQuery query, Func`2 converter) BTW - we are on SP 2007 (MOSS Enterprise) Edited June 29, 2011 by pavers1970 Share this post Link to post Share on other sites
Rahul Kumar Report post Posted June 29, 2011 Hi Pavers, Have you tried installing it into the root site? Share this post Link to post Share on other sites
pavers1970 Report post Posted June 29, 2011 Hi Pavers, Have you tried installing it into the root site? THanks for the quick response Rahul - By "root site" do you mean the "Default Web Site"? We do not have SharePoint installed on the "Default Web Site" actually. It remains as it was when IIS/Windows were first installed. Is this a requirement? If so, I'll see what I can do about first putting SharePoint on the "Default Web SIte", and then trying to install you tool. HOWEVER, Let me know please if this makes sense, and thanks again for the quick response. Share this post Link to post Share on other sites
Rahul Kumar Report post Posted June 29, 2011 Hi Paver, No, I did not mean that you need to install in in "Default Web Site". What I mean is if you are installing it into your "sub site" then try installing it into the "root site" of that "sub site" and check. Share this post Link to post Share on other sites
Rahul Kumar Report post Posted June 29, 2011 Hi Paver, In addition could you please run Config List Generator utility and select the site where you have installed FusionCharts for SharePoint and create and required config list. You can download this utility from: http://www.igcomm.com/developer_workspace/SharePoint/ConfigListCreator-v1.0.1.zip Share this post Link to post Share on other sites
pavers1970 Report post Posted June 29, 2011 Hello Rahul - okay...so to answer your question, YES it is installed in the root site. Still no luck. Also, I tried to run the Config List generator in our dev environment and this is the output that it gave below. Is there a way for me to just manually perform the steps of creating a "config list"? What is that and where does it reside? Thanks again! See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.IO.DirectoryNotFoundException: The system cannot find the path specified. (Exception from HRESULT: 0x80070003) at Microsoft.SharePoint.Library.SPRequestInternalClass.OpenWebInternal(String bstrUrl, Guid& pguidID, String& pbstrRequestAccessEmail, UInt32& pwebVersion, String& pbstrServerRelativeUrl, UInt32& pnLanguage, UInt32& pnLocale, String& pbstrDefaultTheme, String& pbstrDefaultThemeCSSUrl, String& pbstrAlternateCSSUrl, String& pbstrCustomizedCssFileList, String& pbstrCustomJSUrl, String& pbstrAlternateHeaderUrl, String& pbstrMasterUrl, String& pbstrCustomMasterUrl, String& pbstrSiteLogoUrl, String& pbstrSiteLogoDescription, Object& pvarUser, Boolean& pvarIsAuditor, Int32& plSiteFlags) at Microsoft.SharePoint.Library.SPRequest.OpenWebInternal(String bstrUrl, Guid& pguidID, String& pbstrRequestAccessEmail, UInt32& pwebVersion, String& pbstrServerRelativeUrl, UInt32& pnLanguage, UInt32& pnLocale, String& pbstrDefaultTheme, String& pbstrDefaultThemeCSSUrl, String& pbstrAlternateCSSUrl, String& pbstrCustomizedCssFileList, String& pbstrCustomJSUrl, String& pbstrAlternateHeaderUrl, String& pbstrMasterUrl, String& pbstrCustomMasterUrl, String& pbstrSiteLogoUrl, String& pbstrSiteLogoDescription, Object& pvarUser, Boolean& pvarIsAuditor, Int32& plSiteFlags) at Microsoft.SharePoint.SPWeb.InitWebPublic() at Microsoft.SharePoint.SPWeb.get_ServerRelativeUrl() at Microsoft.SharePoint.SPWeb.get_Url() at ListUtil.frmMain.AddSitesToList() at System.Windows.Forms.Form.OnLoad(EventArgs e) at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) at System.Windows.Forms.Control.CreateControl() at System.Windows.Forms.Control.WmShowWindow(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3615 (GDR.050727-3600) CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll ---------------------------------------- ConfigListCreator Assembly Version: 1.0.1.0 Win32 Version: 1.0.1.0 CodeBase: file:///C:/_download/configlist/ConfigListCreator.exe ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3614 (GDR.050727-3600) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- Microsoft.SharePoint Assembly Version: 12.0.0.0 Win32 Version: 12.0.6535.5003 CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SharePoint/12.0.0.0__71e9bce111e9429c/Microsoft.SharePoint.dll ---------------------------------------- Microsoft.SharePoint.Library Assembly Version: 12.0.0.0 Win32 Version: 12.0.6517.5000 CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SharePoint.Library/12.0.0.0__71e9bce111e9429c/Microsoft.SharePoint.Library.dll ---------------------------------------- System.Data Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_64/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll ---------------------------------------- Microsoft.SharePoint.Security Assembly Version: 12.0.0.0 Win32 Version: 12.0.4518.1016 CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SharePoint.Security/12.0.0.0__71e9bce111e9429c/Microsoft.SharePoint.Security.dll ---------------------------------------- System.Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3082 (QFE.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- System.Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll ---------------------------------------- System.Transactions Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_64/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll ---------------------------------------- System.Web Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3618 (GDR.050727-3600) CodeBase: file:///C:/WINDOWS/assembly/GAC_64/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll ---------------------------------------- System.DirectoryServices Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.DirectoryServices/2.0.0.0__b03f5f7f11d50a3a/System.DirectoryServices.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. Share this post Link to post Share on other sites
pavers1970 Report post Posted June 29, 2011 (edited) HI RAHUL! - Okay have some additional information....it is working in the root site collection, but not in the other site collection! Is there a way to get it to work in my other site collections? I made sure to install it in all site collections. Thanks. Edited June 29, 2011 by pavers1970 Share this post Link to post Share on other sites
pavers1970 Report post Posted June 29, 2011 HI RAHUL! - Okay have some additional information....it is working in the root site collection, but not in the other site collection! Is there a way to get it to work in my other site collections? I made sure to install it in all site collections. Thanks. So to be clear: -When I load the web part on to a page in the top level site collection (the root site collection), it works BEAUTIFULLY! -When I load the web part on to a page in other site collections below the root site collection, I get that error above. Note: I **DID*** make sure that the file was installed in all the site collections. This is also true for the development environment. What is this configuration list? Is there a way for the other site collections to make use of this web part? Share this post Link to post Share on other sites
Rahul Kumar Report post Posted June 30, 2011 Hi Paver, We have released another beta yesterday, could you please download the new beta from http://www.fusioncharts.com/sharepoint and re-install it into your server. While re-installing please make sure to do the following: 1. Run the setup of new beta. 2. Choose "Remove" at second step and follow all the steps. 3. Open command prompt at administrative privileged and type following commands into it: 1. net stop "Windows SharePoint Services Timer" 2. net start "Windows SharePoint Services Timer" 4. Re-run newly downloaded setup and follow the instructions. Hope this will solve the issue. Corrected (service names): 1. net stop "Windows SharePoint Services Timer" 2. net start "Windows SharePoint Services Timer" Share this post Link to post Share on other sites
Rahul Kumar Report post Posted July 1, 2011 Hi Paver, Could you please let me know did you get it working or not? Share this post Link to post Share on other sites
pavers1970 Report post Posted July 5, 2011 Hi Paver, Could you please let me know did you get it working or not? Rahul - It worked! Thanks to you and your excellent team for getting the update/fix posted. Share this post Link to post Share on other sites
Guest Angshu Report post Posted July 5, 2011 Hi, Glad to know that you have managed to resolve your issue. Happy FusionCharting! Share this post Link to post Share on other sites
nbritton Report post Posted August 19, 2011 I downloaded install yesterday and installed it on the sharepoint server to all sites. I am now also getting the same error. I have a 2007 moss install. I get the same error on the root and sub sites. Any thoughts?? Share this post Link to post Share on other sites
Rahul Kumar Report post Posted August 22, 2011 Hi, Could you please send us the detailed error information which is being logged in FusionCharts_LogList so that we can check for the issue? P.S - You can refer to the attached PDF to know how to get error log information. Stack-Trace.pdf Share this post Link to post Share on other sites
nbritton Report post Posted August 22, 2011 i am unable to find that list for you. I look on the top level site and the site where i put the webpart. I also conducted a search for it. I have tried to use the URL in the doc but did not have any luck there either. Do you have any other ideas? Hi, Could you please send us the detailed error information which is being logged in FusionCharts_LogList so that we can check for the issue? P.S - You can refer to the attached PDF to know how to get error log information. Share this post Link to post Share on other sites
Rahul Kumar Report post Posted August 23, 2011 Hi, Thanks for the information. Could you please download the list utils from the link below and run it and select the SharePoint Site to which you have installed FusionCharts for SharePoint and click on 'Create List' button and then try to add the FusionCharts for SharePoint web part. http://www.igcomm.com/developer_workspace/SharePoint/ListUtil.zip Please let us know the result. Share this post Link to post Share on other sites
alexjo Report post Posted August 23, 2011 I was getting the same error listed above and ran the ListUtil.zip and everything is working great! Thank you very much! What a great web part! Will this web part expire? Is it free to use for personal use? Share this post Link to post Share on other sites
Rahul Kumar Report post Posted August 24, 2011 Hi, Glad to know it is working now. No it will never expire and you can use the beta version for free. Share this post Link to post Share on other sites
nbritton Report post Posted August 24, 2011 Ok i have done that. When i run it on the sharepoint server i get the following error: microsoft.net framework unhandled exception has occured in your application. a network related or instance specific error occured while establishing a connection to sql server. the server was not found or was not accessible. Verify that the instance name is correct and that sql server is configured to allow remote connection. )provider: Named Pipes Provider, error: 40 - could not open a connection to sql server). i validated the sql server is configured to accept remote connections. I am not sure how to know what instance it is looking for. Thoughts?? See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text ************** System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at Microsoft.SharePoint.Utilities.SqlSession.OpenConnection() at Microsoft.SharePoint.Utilities.SqlSession.ExecuteNonQuery(SqlCommand command) at Microsoft.SharePoint.Upgrade.SPDatabaseSequence.GetVersion(Guid id, Version defaultVersion, SqlSession session, SPDatabaseSequence sequence) at Microsoft.SharePoint.Administration.SPContentDatabase.ValidateDatabaseSchemaCompatibility() at Microsoft.SharePoint.SPSite.PreinitializeServer(SPRequest request) at Microsoft.SharePoint.SPWeb.InitializeSPRequest() at Microsoft.SharePoint.SPWeb.EnsureSPRequest() at Microsoft.SharePoint.SPWeb.get_Request() at Microsoft.SharePoint.SPWeb.InitWebPublic() at Microsoft.SharePoint.SPWeb.get_ServerRelativeUrl() at Microsoft.SharePoint.SPWeb.get_Url() at ListUtil.frmMain.AddSitesToList() at ListUtil.frmMain.frmMain_Load(Object sender, EventArgs e) at System.Windows.Forms.Form.OnLoad(EventArgs e) at System.Windows.Forms.Form.OnCreateControl() at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible) at System.Windows.Forms.Control.CreateControl() at System.Windows.Forms.Control.WmShowWindow(Message& m) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ScrollableControl.WndProc(Message& m) at System.Windows.Forms.ContainerControl.WndProc(Message& m) at System.Windows.Forms.Form.WmShowWindow(Message& m) at System.Windows.Forms.Form.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies ************** mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3623 (GDR.050727-3600) CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll ---------------------------------------- ListUtil Assembly Version: 1.0.0.0 Win32 Version: 1.0.0.0 CodeBase: file:///D:/Admin/Sp%20Solutions/fusioncharts-for-sharepoint-2007/ListUtil/ListUtil.exe ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3623 (GDR.050727-3600) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3624 (GDR.050727-3600) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- Microsoft.SharePoint Assembly Version: 12.0.0.0 Win32 Version: 12.0.6020.5000 CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SharePoint/12.0.0.0__71e9bce111e9429c/Microsoft.SharePoint.dll ---------------------------------------- Microsoft.SharePoint.Library Assembly Version: 12.0.0.0 Win32 Version: 12.0.6010.5000 CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SharePoint.Library/12.0.0.0__71e9bce111e9429c/Microsoft.SharePoint.Library.dll ---------------------------------------- System.Data Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll ---------------------------------------- Microsoft.SharePoint.Security Assembly Version: 12.0.0.0 Win32 Version: 12.0.4518.1016 CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.SharePoint.Security/12.0.0.0__71e9bce111e9429c/Microsoft.SharePoint.Security.dll ---------------------------------------- System.Xml Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3082 (QFE.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll ---------------------------------------- System.Configuration Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll ---------------------------------------- System.Transactions Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll ---------------------------------------- System.Web Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3618 (GDR.050727-3600) CodeBase: file:///C:/WINDOWS/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll ---------------------------------------- Microsoft.Office.Server Assembly Version: 12.0.0.0 Win32 Version: 12.0.4518.1014 CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.Office.Server/12.0.0.0__71e9bce111e9429c/Microsoft.Office.Server.dll ---------------------------------------- Microsoft.Office.Server.Intl Assembly Version: 12.0.0.0 Win32 Version: 12.0.4518.1014 CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/Microsoft.Office.Server.intl/12.0.0.0__71e9bce111e9429c/Microsoft.Office.Server.intl.dll ---------------------------------------- Microsoft.SharePoint.Search Assembly Version: 12.0.0.0 Win32 Version: 12.0.6013.5000 CodeBase: file:///C:/WINDOWS/assembly/GAC_32/Microsoft.SharePoint.Search/12.0.0.0__71e9bce111e9429c/Microsoft.SharePoint.Search.dll ---------------------------------------- msvcm80 Assembly Version: 8.0.50727.3053 Win32 Version: 8.00.50727.3053 CodeBase: file:///C:/WINDOWS/WinSxS/x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.3053_x-ww_B80FA8CA/msvcm80.dll ---------------------------------------- ************** JIT Debugging ************** To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: <configuration> <system.windows.forms jitDebugging="true" /> </configuration> When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box. I was getting the same error listed above and ran the ListUtil.zip and everything is working great! Thank you very much! What a great web part! Will this web part expire? Is it free to use for personal use? Share this post Link to post Share on other sites
Rahul Kumar Report post Posted August 25, 2011 Hi, It is really strange that why it is showing that error, as there is no any code which checks for SQL server, from the Log it seems that this error is coming from SharePoint itself when it is trying to retrieve a list of SP Sites. Could you please try opening SP Web Site in a browser and check if it is opening properly and then try to re-run the ListUtil application? Share this post Link to post Share on other sites
nbritton Report post Posted August 25, 2011 The sites appear to working correctly, search is working as it should as well. I tried again with the same error. Hi, It is really strange that why it is showing that error, as there is no any code which checks for SQL server, from the Log it seems that this error is coming from SharePoint itself when it is trying to retrieve a list of SP Sites. Could you please try opening SP Web Site in a browser and check if it is opening properly and then try to re-run the ListUtil application? Share this post Link to post Share on other sites
Rahul Kumar Report post Posted August 25, 2011 Hi, To run the ListUtil one would need to be an Administrator of the Windows Server and SP2010 server - Could you please confirm that? Share this post Link to post Share on other sites
nbritton Report post Posted August 25, 2011 This is shareppoint moss 2007 on a server 2003 Hi, To run the ListUtil one would need to be an Administrator of the Windows Server and SP2010 server - Could you please confirm that? Share this post Link to post Share on other sites
nbritton Report post Posted August 25, 2011 I did find that it is working on one of the other site i installed it on as well. I would like to see if we can figure out how to get it on the main site, but this will work for testing and report development. Share this post Link to post Share on other sites
