nabil Report post Posted December 18, 2006 Hello, I don't know if this is a bug or just a configuration issue. When I try to print a chart in fusioncharts V3. The right side of it doesn't fit in my paper. I tried to resize it and everything but always the same problem. Have anyone had this same problem ? Thanks, Share this post Link to post Share on other sites
Pallav Report post Posted December 18, 2006 Are you using the browser's print control or context menu of chart to print? Share this post Link to post Share on other sites
nabil Report post Posted December 28, 2006 I used all the possibilities I have to print the charts. I used the browser print function and also the print from the charts menu. Same results :-( Share this post Link to post Share on other sites
Scott K Report post Posted January 11, 2007 I am also unable to print charts correctly in anything but IE 7. I've tried Firefox (PC and Mac) and Safari (Mac). In all cases, the chart prints larger than on the screen, and is cropped (on the bottom and right) to the specified chart size. Share this post Link to post Share on other sites
Scott K Report post Posted January 11, 2007 Here's a screen capture of a chart on a webpage via Safari, and the resulting print preview. Share this post Link to post Share on other sites
Pallav Report post Posted January 23, 2007 We've identified the problem of cropping during printing and would be fixing the same in our next release (in a few weeks time). Thanks a lot for your inputs and time and sorry for any inconvenience due to this. Share this post Link to post Share on other sites
jessedklebba Report post Posted July 18, 2007 Hasing this cropping issue been resolved? Share this post Link to post Share on other sites
Pallav Report post Posted July 20, 2007 Yes - in v3.0.3 Share this post Link to post Share on other sites
RschDriven Report post Posted August 25, 2007 Hello all, I am a new user of FusionCharts Professional for Filemaker currently formatting a lengthy research report that combines data tables with one or two FusionCharts on each page to be delivered as PRINTED report documents. My problem is that after sizing the web viewer to contain the chart associated with the data and then sizing the chart to fit within the web viewer as viewed on the computer display, the printed page appears to show only about 15 percent to 20 percent of the intended chart. I'm using Filemaker v8.5 and a Macintosh 17 inch PowerBook G-4 with Mac OS 10.4.10. I have been using trial and error methods to find a combination of web viewer size and chartWidth/chartHeight that will control the printed output. So far no luck with pressure on a deadline mounting. Would anyone have suggestions? Thanks and regards, Phil Share this post Link to post Share on other sites